FAQs

All shower doors and bathroom products (Add-Ons) ship same business day if they are ordered before 1PM EST. All others ship the next available business day. We are called ShowerDoorsExpress.com for a reason!

FREE! Yet still very fast!

Sorry, due to our very low prices, and free expedited delivery, we can only accept exchanges for products damaged during the delivery or manufacturer's damage. If parts are missing or parts that may be replaced are damage, we will replace them at no cost. No returns may be accepted due to customer's changing their mind on the product, or error in measurements of your bathroom, or any other reasons.

Tempered glass is strong and safe, but no glass is unbreakable. The installation of any shower needs to be done properly and professionally. Damaged edges are the most common reason shower doors break, followed up by glass that wasn't set properly in the frame.

This is an inexpensive and easy way to keep your shower clean in an environmentally-friendly way. Spray the water and vinegar onto the glass and let it sit on the door for up to five minutes if the soap scum or hard water stain appears tough to remove.

While framed shower doors cost $80 to $300, quality frameless shower doors start around $700 to $1,200, and the price can go up from there. Shop Frameless Shower Doors

Most frameless shower doors are made from tempered glass, which is designed to shatter into small pieces as a safety precaution. ... A door may be improperly installed, which could be putting pressure on the door and cause it to break.

Can you design a shower door that doesn't leak? With proper design and installation, frameless showers should not have problems with water leakage, but they are not 100 percent watertight. There are many ways to prevent water leakage around a frameless shower door. We may add a back sweep to the rear of the door.

Frameless shower doors do have very small gaps at the hinges and sides of the doors. However, with proper installation, it is highly unlikely that water will pass through these gaps. There are several guidelines that can help assure your shower is free from leaks.

Why do I need a header over my frameless shower door? Headers are used when a fixed glass panel is hinged to an adjoining glass door. ... A support header relieves some of the tension to prevent weakening of the glass-to-glass connection over time. Headers are not necessary if the glass door attaches into a wall.

Take careful measurements of the shower opening to ensure your shower doors will fit the space. Use the width at the widest point to select the appropriate size. Choose a shower door that has a maximum width equal to or greater than the maximum width of your tub or shower opening.

The actual installation of your new shower door should take about 2-3 hours for a professional installer.

The average cost is $400.00 to $600.00 for the tub and walls. Installation costs another $1,000.00 or more depending on complications such as running new plumbing, installing a unit on an upper floor, etc. They are often made of fiberglass, though other materials are available.

Installing a shower door costs between $250 and $380 on average nationwide for a simple, single door with chrome hardware on a pivot. A set of sliding glass doors with nickel hardware can range from $350 to $700.

Installing a shower door costs between $250 and $380 on average nationwide for a simple, single door with chrome hardware on a pivot. A set of sliding glass doors with nickel hardware can range from $350 to $700. A frameless shower enclosure will cost about $1,000, and a bathtub may cost as much as $900.

The average cost to install a glass block wall in a bathroom is about $700. Most homeowners pay between $550 to $1,300.

The height of the glass can range between the min size of your opening to max of 96". Standard height of a single glass shower door is 72".

Spontaneous glass breakage is a phenomenon by which toughened glass (or tempered) may spontaneously break without any apparent reason. The most common causes are: ... Binding of the glass in the frame, causing stresses to develop as the glass expands and contracts due to thermal changes or deflects due to wind.

A framed shower door is constructed of thinner and weaker 1/8″ to 3/16″ glass. It relies on metal to strengthen the enclosure. ... A frameless shower door lasts much longer than a framed shower door, and eliminates ugly thick metal framing. Frameless shower doors are the easiest of any shower door to clean.

Bypass shower door is another name for a sliding shower door system that consists of two or sometimes three tempered glass or plastic panels. ... The bottom track allows the doors to slide.

Bypass shower door is another name for a sliding shower door system that consists of two or sometimes three tempered glass or plastic panels. ... The bottom track allows the doors to slide. Shop Bypass Shower Doors

Euro shower doors are a frameless glass shower design that's becoming very popular throughout the United States. The frameless style gives an impression of openness without having an unsightly metal frame holding it together. Euro shower doors can really make your bathroom look high-end!

A pivot shower door is a swinging door that has a pivot hinge allowing the door to open in either direction. Pivot shower doors can swing 180° so they can open in or out. Pivot hinges are the design used on most ultra-modern curved glass shower doors.

What Are Average Shower Door Sizes? In general, the width of a shower door should be between 22 inches and 36 inches.

Bypass or sliding doors. Take up the least amount of space. Consist of 2 or 3 panels that slide past each other on top and bottom tracks. Ideal for wide openings, with a typical opening of 60 inches wide. Commonly used in alcove and corner standalone showers or bathtub showers with stationary panels. Shop Alcove Shower Doors

There are typically two thickness options for frameless shower door glass: 3/8″ and 1/2″. 3/8″ glass is the minimum thickness that will provide the necessary stability and soundness of the glass door. This is a popular choice because it is less expensive than thicker glass.

As a general rule, a stationary shower glass panel is made out of ½ inch glass. However, for a door that opens and closes, it's best to use 3/8-inch glass. It's not about making the shower door thinner; it's actually making the panel thicker.

It's this hinge type that allows a door revolving door to spin, while staying in place. Only most pivot-hinged shower doors mount top-to-bottom at the corners of the door, allowing the door to swing 180 degrees in each direction.

A Semi Frameless shower enclosure also has metal around the entire structure, but does not have metal around the entire door – Thus the term semi frameless. ... In order to qualify as being frameless, the glass thickness must be 3/8” or 1/2" and the door must be attached by hinges only – no metal around the door.

Shower floor minimum size is usually mandated to be at least 30 inches square; that is, 30 inches by 30 inches. Because shower doors are usually glass and can break (and because of other access issues), bathroom code says that shower doors need to have at least 24 inches of opening clearance.

However, your shower door can open in both directions, outward-opening and inward-swinging. You'll need about 30" of clearance space outside your shower to install a swinging shower door. If your bathroom is not configured for a shower door, consider choosing a sliding shower door.

However, your shower door can open in both directions, outward-opening and inward-swinging. You'll need about 30" of clearance space outside your shower to install a swinging shower door. If your bathroom is not configured for a shower door, consider choosing a sliding shower door.